How To Apply Your Art Decal

Step 1: Commence with a Clean Surface

Before applying your art decal, ensure the area is thoroughly cleaned. Use either soap and water or a 50/50 mixture of rubbing alcohol (70% isopropyl alcohol) and water. Avoid window-cleaning products, as they may leave a residue, affecting the decal’s adherence.

Step 2: Optimal Application Temperature

For optimal results, install art decals in a shaded area away from direct sunlight. Apply when the temperature is between 50°F and 90°F.

Step 3: Use Masking Tape

Position your art decal precisely using masking tape. Keep the white backing paper facing the surface, affix masking tape along the top edge, and lift the decal as if on a hinge. Peel off the backing paper while holding the bottom edge, gradually lowering the decal from top to bottom.

Step 4: Use the Wet Method

For large-sized Limited Edition decals, use the wet method. After cleaning, wet the surface with a 5% soap / 95% water solution using a spray bottle. Apply the decal while the area is wet, allowing time for repositioning. Remove bubbles with a squeegee or plastic card. When the soapy water dries it will leave the decal firmly affixed.